HYPERION EOS1210I 12S 30N LIPOLY/A123/NICD/NIMH CHARGER

NEW! Hyperion EOS 1210i 12S 30N CHARGER, with Terminal Capacity Selection and Speed 2C Rate - See Details!

IMPORTANT TECH NOTES FROM HYPERION

Connection Order:

Always connect the MAIN pack leads (the two +/- thick wires) to the charger FIRST, then insert the BALANCE Connector into the charger balance adapter.

Disconnection Order:
Always disconnect the BALANCE connector from the charger FIRST and then disconnect the MAIN pack leads (the two +/- thick wires).

The EOS 1210i is an extremely powerful (180W, 10A max), versatile, easy-to-use charger with special features for speed charging lithium packs up to 12S! 2C rates are possible - in addition to Terminal Capacity Selection - allowing you to charge and fly lithium polymer packs* in as little as 27 minutes. NiCd and NiMH packs of up to 30 cells, and lead-acid batteries to 12V are also supported. Output Charge Cord/Connector set included.

Monitor the individual cell voltages on the LCD screen of EOS1210i while you balance your lithium packs with LBA 10 and optional cable #HP-EOSLBA10-DPC. Network two LBA 10 together with NET Adapter pack #HP-EOSLBA10-MSC, and you can charge two packs of same cell type and capacity (such as 6S and 6S) at the same time, and every cell in both packs will be balanced to the other when charging is done, for packs from 7S to 12S!

HP-EOS1210I-SEN is the Temperature sensor for EOS1210i. It plugs into a dedicated port and allows you to specify a pack temperature at which charging will be stopped, and/or monitor pack temp during the charge.

Dimensions: 6cm tall x 15.5cm front/back x 14.5cm wide (2.35 x 6.0 x 5.7")
Weight: 640g (1.4lbs)

*27-28minute estimate on basis of lithium pack rated for 2C+ charge rate, with terminal capacity selection of 90%. All Hyperion lithium batteries are rated for 2C+ charging.